Tips for protecting your commercial or residential building from water damage

Image of a water leak from a washing machine.

It was 3am. Most of the residents of the 22nd storey condo building were fast asleep, unaware of water that had begun silently sluicing behind their walls and ceiling, all the way to the ground floor. By morning, a significant amount of water had spewed out of a tiny half inch connection on a faulty toilet hose in a 21st floor bathroom. The tenant was away for the weekend. 

Damage occurs to various units on floors 1 though 21, including leaks in drywall, contents, electrical, the elevator, fitness centre and in other common rooms. Occupants in units that were affected have been temporarily displaced because of the property damage and the common elements were out of service for a few weeks. What started as a small water leak ultimately resulted in over a $1 million in total loss.

Although this sounds like a large loss, it’s far from uncommon. In 2021 alone, water was the cause of more than $200,000,000 in losses for Aviva customers across Canada. 

All forms of water damage including sewer backups, flood damage, broken pipes, roof leaks consistently represent one of the top 3 leading causes of loss for Aviva.  Some of these losses are naturally occurring and challenging to manage however, there are many opportunities to prevent or reduce the affects of a water damage loss.

Knowing your building is the first step in water damage mitigation

Recommended additional steps may include:

  • Developing an internal inspection routine that includes periodic checks of the roof, boiler and machinery, sanitary, domestic and fire water systems
  • A water valve isolation map of domestic water and fire protection systems to help support internal visual inspections
  • Note any aged infrastructure and have a plan in place to replace or repair
  • Developing a maintenance plan for critical equipment, including having critical spare parts on hand
  • Having a contractor management program that includes vetted qualified contractors who know your system and are prepared
  • A water damage plan as part of a business interruption plan can be included to prepare for any unforeseen issues that may occur as well as associated training of onsite personnel

Routine site inspections can catch something that can be a quick fix instead of a big problem.

Preventative maintenance can include:

  • Annual (or as required) contractor inspections to certify systems and equipment
  • Non-destructive testing on systems that include:
    • Infrared inspections on roof and envelop of the building for leakage
    • Ultrasonic testing on aged pipes (to determine wall thickness)
    • Leak testing on water systems
    • Scoping pipes for wear and tear
  • Testing and exercising equipment and systems as needed
  • Scheduled maintenance including replacing or repairing wear and tear items
  • Utilise a Building Automation Systems (BAS)

Utilise a BAS system

BAS systems help connect and monitor functions across a building, from HVAC systems to electrical and are often wired through one set of controls. It can alert a responsible person if there is a failure or breakdown of any connected equipment.  

Water related technologies can be connected through a BAS system and include active and passive water leak detection systems that help monitor, control and notify the operators of a condition that could lead to significant water damage.  With these systems, you can start off small with a few key areas such the mechanical and electrical rooms and add sensors where there is a need, however for complete protection all areas with water exposures should be protected.

Many insurers recognise Water Damage Prevention Association of Canada (PREVCAN) which is an association that promotes water damage technologies and associated standards including design, installation and maintenance. PREVCAN takes the guesswork out of trying to find a certified product and knowledgeable installer, be wary of off-the-shelf products that are not recognised by any industry standards or your insurer.

Have a water damage control plan

A water damage control plan is similar to a fire safety plan. Know what you’re going to do before an emergency (e.g. drills to test the plan), during an emergency, (e.g. shut off valves) and after an emergency (e.g. document damage, contact insurance company, have a vetted restoration company ready to go). 

Staff need to be trained to understand the overall plan and what their specific role is in the event of a water emergency. It’s critical to periodically test the plan to ensure it works. 

Learn more about water damage

If you’re looking for more information about the impact of water damage and how to mitigate potential risks, contact your insurance broker or Aviva’s Risk Management Solutions team at arms.canada@aviva.com

Helpful resources to learn more:

The content in this article is for information purposes only and is not intended to be relied upon as professional or expert advice.


Copyright in the whole and every part of this site belongs to Aviva Canada Inc., unless otherwise indicated, and may not be used, sold, licensed, copied or reproduced in whole or in part in any manner or form or in or on any media to any person without the prior written consent of Aviva Canada Inc.